ohmex DUETTO PLUS, Instruction Manual

Page: 99 / 112

95
DUETTO PLUS
EN
PREPARATION OF THE APPLIANCE
d3 - Position the conical part of the kibbe accessory (Q1)
on the infeed duct (B).
d4 - Tighten the ring nut (O) using your hands.
While tightening the nut (O) with the other
hand hold the infeed duct (B).
Do not use the star blade (I) or the disks
for grinding for kibbe preparation.
> > To use the “GRATER”
e1 - Press the lock button and insert the cutting mechanism made of white plastic in the
entrance of the tube.
During insertion, make sure that the plastic cutting mechanism is inclined as
indicated by the arrow).
Turn the plastic cutting mechanism clockwise until it is fully tightened, and then
release the lock button.
e2 - Put the barrel of the grater into the cutting unit, and then rotate the cylinder clockwise
so that it is properly closed.
Q1
ON R
R
ON
B O
e1 e2