Ohmeda Ohio 2000 IWS Series, Operation And Maintenance Manual

Page: 67 / 80

A-9
6600-0255-000 12/20/00
Appendix
A-9
Instrument shelf:
Dimensions 30 x 30 cm
Load limit: 9kg
Oxygen flowmeter with DISS fittings: 0 to 15 LPM
Air flowmeter with DISS fittings: 0 to 15 LPM
Airway Manometer: -20 to +100 centimeters of water
IV pole - 30 and 60 cm
Gas manifold with 1/8 inch NPT fitting
9 cm utility post
Drawer Storage Accessory:
(for all models with beds - stationary or rotating)
Standard drawer 38 x 39 x 10 cm
14,820 cm
3
per drawer
Deep Drawer 38 x 39 x 23 cm
34,086 cm
3
per drawer
WARNING:
w w w w w
Overloading the drawers can affect the stability of the unit. Limit the load
to 4.6 kg per drawer, 9 kg per deep drawer.
Utility Post, 22 Inch (0217-5376-800)
2.5 cm diameter x 56 cm long post
Provides a rigid vertical mounting space for stack mounting of equipment. The post
should be mounted as low as possible to ensure the stability of the Warmer.
Vacuum Manifold with DISS Adapters
Two DISS vacuum adapters are mounted on a standard manifold block. The locations
of these adapters can be changed to any of the other tapped holes in the block to meet
special requirements.
Vacuum Bottle Slide Bracket
The standard vacuum bottle slide can be mounted on either upright.
Ventilator Mounting Post
The vertical mounting post is a non-locking 1 inch diameter shaft which pivots in an 22
cm radius from the upright. One end of the shaft extends 36 cm while the other
extends 16 cm. Ventilators, humidifiers, blenders or other user hardware can be
pivoted into optional position.