3-19
6600-0255-000
12/20/00
3/Operation
3-19
Rail system components mount to the uprights and provide ready access to commonly
used equipment such as suction regulators, flowmeters, collection bottles, etc.
CI.02.005
CI.02.004
Loosen mounting screw and
place mounting block in
position.
Tighten mounting screw.
Figure 3-10
Mounting rail system components
A. Mounting and Releasing Procedure
(See Figure 3-10)
1.
Loosen the mounting screw on the mounting block.
2.
Place the mounting block in position on the rail.
3.
Tighten the mounting screw.
4.
Release the rail system component by loosening the mounting screw.
B. Adapter Plate Mounting and Releasing Procedure
(See Figure 3-11)
Universal Adapter plate allows Vacuum/Collection bottle slides and Bird blender
bracket to mount to the rail system.
1.
Loosen the two mounting screws on the side of the adapter plate with the hex key
provided with the plate.
2.
Place the adapter plate in position on the rail.
3.
Tighten the two mounting screws.
4.
Release the adapter plate by loosening the mounting screws.
Summary of Contents for Ohio 2000 IWS Series
