Valor™ 2000W Series
EN-5
TABLE 3-2 Display Symbols
Item Description
Item
Description
1 NET symbol
7
Dynamic symbol*
2 Center of Zero symbol
8
Battery charge symbol
3 Negative symbol
9
Pound, Ounce, Pound:Ounce symbol
4 Stable weight symbol
10
Gram, kilogram symbol
5 Preset Tare symbol*
11
Pieces symbol*
6 Pointer symbols*
12
Percent symbol*
Note:
* Not Used
Figure 3-3. Valor 2000W – V22PW
Rear display.
3.2 Turning Scale On/Off
To turn the scale on, press the
On/Zero Off
button. The scale performs a display
test, momentarily displays the software version, and then enters the active weighing
mode.
To turn the scale off, press and hold the
On/Zero Off
button until OFF is displayed.
3.3 Calibration Menu
To enter the calibration menu, extend press
Cal
button for 5 seconds, [
SpaN
] will
then be displayed. Press
Zero
key to perform span calibration or press
Cal
key to
proceed to GEO settings. Press
Zero
key to enter GEO settings and then press
Cal
key to increase the value. Press
Zero
key to confirm, [
end
] will be displayed. Press
Zero key to exit the menu and return to weighing mode.
Cal
Figure 3-4. Menu structure
Span
[
SpaN
] (yes, no)
Initiates a span calibration procedure (zero and span).
GEO
[
GEO
]
Geographical Adjustment Factor (GEO) is used to adjust the calibration based on
the current location. Settings from 0 to 31 are available with 12 being the default.
Refer to table 4-2 to determine the GEO factor that corresponds to your location.
Span
GEO
End
www.
GlobalTestSupply
.com
Find Quality Products Online at:
