EN-10 Valor™ 2000W Series
4.6 Menu Settings
The User Menu allows the customizing of scale settings.
Note:
Valor 2000W – V22PW does not have these Menus.
4.6.1 Menu Navigation
User Menu:
Menu:
C.A.L M.O.d.E U.n.i.t
E.n.d
Menu
Items:
Span
Lin
GEO
End
Reset
Check
End
kg
g
oz
lb
lb:oz
End
To Enter the Menu Mode
Press and hold
Menu
until
[
mMeNU
]
(Menu) is displayed. When released the first sub-
menu
[
C.a.l
]
(Cal) will be shown.
Press
Yes
to enter the displayed sub-menu or press
No
to advance to the next.
Selecting a sub-menu will display the first menu item. Press
Yes
to view the menu
item setting or press
No
to move to the next menu item. When viewing the setting,
press
Yes
to accept the setting, or press
No
to change the setting. When
[
End
]
is
displayed, press
Yes
to return to the sub-menu selections or
No
to return to the first
item in the current menu.
Bold
indicates factory default setting.
Note:
The Calibration / Menu Mode indicator is displayed when in the Menu Mode.
4.6.2 Cal Menu
Enter this menu to perform calibrations.
•
Span
[
SpaN
]
(yes, no)
Initiates a span calibration procedure (zero and span).
•
Lin
[
LIN
]
(yes, no)
Initiates a linearity calibration procedure (zero, mid-point and span).
•
GEO
[
GEO
]
Geographical Adjustment Factor (GEO) is used to adjust the calibration
based on the current location. Settings from 0 to 31 are available with 12
being the default. Refer to table 4-2 to determine the GEO factor that
corresponds to your location.
•
End Cal
[
End
]
Advance to the next menu or return to the top of the current menu.
4.6.3 Mode Menu
Enter this menu to activate modes so they will be available for use with the Mode
button. Weigh mode is always active by default.
•
Reset
[
reset
]
(
no
, yes)
Reset the Mode menu to factory defaults.
•
Check
[
CHECk
]
(off,
on
)
Set the sub-mode.
•
End Mode
[
End
]
Advance to the next menu or return to the top of the current menu.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
