Settings in the menu
Ranger RC
31
4.6 Configuring interfaces (COMMUNICATION)
4.6.1
COM1/COM2 -> MODE – operating mode of the serial interface
4.6.2
COM1/COM2 -> PRINTER – settings for protocol printout
This menu item only appears if the mode "Print" or "A.Print" is selected.
Manual data output to the printer with
A.Print
Automatic output of stable results to the printer (e. g. for series weighing operations)
CONtINU
Ongoing output of all weight values via the interface
dIALOG
Bi-directional communication via OHAUS or MT-SICS commands, control of the
scale via PC
CONt.OLd
As per
CONtINU
, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
dIAL.OLd
As per
dIALOG
, see above, but with 2 fixed blanks in front of the unit (compatible
with Spider 1/2/3)
dt-b
DigiTOL-compatible format.
GROSS
•
Transfer of the gross weight, identified with "G"
tArE
•
Transfer of the tare weight
nEt
•
Transfer of the net weight
dt-G
As per
dt-b
, see above, gross weight identified with "G"
COnt-Wt
TOLEDO Continuous mode
COnt-Ct
TOLEDO Continuous mode, transfer of the number of pieces
2nd.dISP
For connecting a second display (automatically activates the 5-V voltage supply at
Pin 9)
rEF
Data transfer from the reference scale (automatic switchover)
bULK
Data transfer from the quantity scale (automatic switchover)
AuXILIA
Data transfer from the reference or quantity scale (manual switchover)
tEmPLat
Selecting protocol printout
StdArd
•
Standard printout
tEmPLt1
•
Printout in accordance with Template 1
tEmPLt2
•
Printout in accordance with Template 2
ASCi.FmtT
Selecting formats for the protocol printout
LINE.Fmt
•
Line format:
MULtI
(multi-line) or
SINGLE
(single-line)
LENGtH
•
Line length: 0 ... 100 characters, appears only with line format
MULtI
SEPArAt
•
Separator: , ; . / \ _ and space; appears only with line format
SINGLE
Add LF
•
Line feed: 0 ... 9
