Ranger RC
30
Settings in the menu
4.5 Terminal settings (TERMINAL)
4.5.1
DEVICE – Sleep mode, energy-saving mode and display backlighting
4.5.2
ACCESS – password for Supervisor menu access
4.5.3
RESET – resetting terminal settings to the factory settings
SLEEP
This menu item only appears on devices in mains operation.
When
SLEEP
is activated, the scale switches off display and backlighting after the
time period set when not in use. The display and backlighting are switched on again
at the press of a key or if the weight changes.
Possible settings: OFF, 1 min, 3 min, 5 min
PWr OFF
This menu item only appears on devices in battery operation.
When
PWr OFF
is activated, the device switches itself off automatically after
approx. 3 minutes when not in use.
b.LIGHt
Switching the display backlighting on/off.
On scales with a battery, the background lighting switches itself off automatically if
there has been no activity on the scale for 5 seconds.
Note
This menu item is accessible without a Supervisor password.
SUPErVI
Password entry for Supervisor menu access
ENtER.C
Request to enter password
Enter the password and confirm with
Yes
rEtYPE.C
Request to repeat the password entry
Enter the password again and confirm with
Yes
Notes
•
The password can consist of up to 4 characters.
•
The
key must not be part of the password. It is required for confirming
the password.
•
The
ZERO
key may only be used in combination with another key.
•
If you enter an impermissible code or make a typing error in the repetition,
COdE.Err.
appears in the display.
SUrE?
Confirmation inquiry
•
Reset terminal settings to the factory settings with
Yes
•
Do not reset the terminal settings with
No
