Counting
Ranger RC
17
3 Counting
The Ranger RC compact scales have additional functions for piece counting.
The relevant settings in the menu are described in Section 4.4.1.
3.1 Counting parts into a container
1. Place the empty container on the scale and press
TARE
.
The container is tared and the zero display appears.
2. Place
10
reference parts on the scale and press
Sample 10
.
-or-
Place the number of pieces displayed above the key
Sample Size
on the scale
and press
Sample Size
.
The scale determines the average piece weight and then shows the number of
pieces.
3. Add more parts to the container until the required number of pieces is reached.
Note
•
The average piece weight remains saved in the factory setting until a new average
piece weight is determined.
•
With
Count Weight
it is possible to switch between the number of pieces and the
weight.
•
When the number of pieces is displayed, it is possible to display the average
piece weight with
Info
, i. e. the weight of a single reference part, for 2 seconds.
•
If
A.CL-APW ON
is set in the menu, the average piece weight is automatically
cleared after each counting operation. The average piece weight must be deter-
mined again for the next counting operation.
•
If
ACCurCY ON
is set in the menu, the accuracy achieved is briefly shown after
the number of pieces is determined.
3.2 Counting parts out of a container
1. Place the full container on the scale and press
TARE
.
The container is tared and the zero display appears.
2. Remove
10
reference parts and press
Sample 10
.
-or-
Remove the number of pieces displayed above the key
Sample Size
and press
The scale determines the average piece weight and then shows the number of
pieces removed, together with a minus sign.
3. Remove more parts from the container until the required number of pieces is
reached.
Sample Size
.
