Ranger™ Count 2000 Series EN-7
3.3.2 APW Establishment
If there is no APW established, both the piece weight display and the count display
will show 0.
Positive Sampling:
1. Place the sample on the pan.
2. Input the sample size with the numeric keypad. The value is displayed in
the count window
.
Alternatively the
Sample
key can be used instead. Pressing the
Sample
key and
[
------
]
is displayed in the count window. Then input the sample
size value (only integer).
3. Press the
Sample
key,
[
------
]
will be displayed in both the piece window
and the count window.
4. The established APW and count will be displayed.
Negative sampling:
1. Place container with the samples on the pan.
2. Tare the scale, a NET 0 will be displayed.
3. Remove the samples from the container; weight window will now display a
negative net reading.
4. Input the sample size with the numeric keypad. The value will be displayed
in the count window.
Alternatively the
Sample
key can be used instead. Pressing the
Sample
key and
[
------
]
is displayed in the count window. Then input the sample
size value (only integer).
5. Press the
Sample
key,
[
------
]
will be displayed in both the piece window
and the count window.
6. The established APW and count will be displayed.
Entering a known APW:
1. Press the
APW
key,
[
------
]
will be displayed in the piece window
2. Input the APW value.
3. Press the
APW
key, the new APW value will be displayed in piece weight
window.
3.3.3 Simple Counting
1. After a valid APW is established, if required place a container on the pan
and press
Tare
.
2. Place the sample on the pan.
3. The quantity will be displayed in the count window.
