EN-14
Ranger™ Count 2000
Series
Span
[
SpaN
]
Initiates a span calibration procedure (zero and span).
Lin
[
LIN
]
Initiates a linearity calibration procedure (zero, mid-point and span).
GEO
[
GEO
]
Geographical Adjustment Factor (GEO) is used to adjust the calibration based on
the current location. Settings from 0 to 31 are available with 12 being the default.
Refer to table 4-2 to determine the GEO factor that corresponds to your location.
End Cal
[
End
]
Advance to the next menu or return to the top of the current menu.
4.3 Setup Menu
Enter this menu to set scale parameters.
Reset
[
reset
]
Reset the Setup menu to factory defaults.
NO
= not reset
YES = reset
Reset:
no
, yes
Power on unit:
auto
, kg, g, lb, oz, lb:oz
Zero Range:
2%,
10%
Auto Opt:
off,
on
Auto Tare:
on,
off
, on-acc
Beeper Opt:
off,
on
Beeper Signal:
off
, Accept, Under, Over, Under-Over
Beeper Key:
off
, on
Accumulation: off, auto,
manual
End Setup:
Exit menu
Span:
Perform
Linearity:
Perform
Geographic
Adjustment:
Set 0…
12
…31*
End Calibration:
Exit menu
*Bold
always represents factory default value.
