INSTRUCTION MANUAL
16
The consumption of water and foam fluid will depend on variables such as: pressure and
flow available and how the machine is controlled. The values shown are estimated average
values.
• Working without PREMIX
Consumption of foam fluid: 3 L/min
• Working with PREMIX
Foam fluid and water mixture: 50 L/min
WATER AND FOAM FLUID CONSUMPTION
• SIROCCO machine provided with this head has been designed for the effect outlined. Any
use other than the one outlined excludes Oh!FX from all liability and warranty.
• Disconnect the machine from the power supply before changing the head and/or rear grid.
• Never turn on the motor without having a head and the rear grid in position and their
screws tightened.
• Do not wet or cover the power supply. To clean it, use a damp cloth and dry it immediately.
• Use only consumables which are intended for this use and duly certified.
• Do not cover attendees with foam. The maximum level of foam should allow you to be
able to see all attendees at all times.
• If you are placing the machine on top of a tripod, make sure that the tripod is rustproof,
that it can bear up to 50kg and that it has enough leg span to give it stability (minimum
100cm between legs). The height of the tripod should never exceed 130cm.
CAUTION
