www.oes-scoreboards.com | 1.877.652.5833
4056 Blakie Rd., London ON Canada N6L 1P7
Rev: ISC9000_j12.0_1.3
Issued: 2021-10-21
Page 18 of 44
•
To set the RF channel and address group, fill in the desired values.
•
Set CH (channel) and ADD (address group) for the scoreboards to match corresponding controllers
Option 2
•
Use CLEAR button to toggle YES and NO. ENTER button will accept input.
•
Select YES if, the scoreboard associated with that channel will be controlled by the controller. If NO, then
the scoreboard will be used as normal.
•
If yes, settings will be applied and saved to scoreboards in the area. If no, settings will be deleted.
•
Press ENTER to return back to the game mode.
CONFIGURATION OPTION #0 – TIME OUTS
This function can be used to setup fixed time out table for quickly starting different time out times. Setting up
the table will happen in this menu. Function of the TIME OUTS will be covered in
Intermission / Break / Time
out Timer
section.
First screen
Follow on-screen instructions.
•
Separate Clock (nMSG): YES/NO
o
YES - will display the TIME OUT time on a separate clock that is specifically setup to display TIME
OUTS.
o
NO - will display the TIME OUT time on the scoreboard in the GAME TIME section whenever
active.
•
Table : select between OFF, NBA National, NBA Local and INT Mode
o
Off
o
NBA NAT– time out table setup for national broadcast
o
NBA LOC – time out table setup for local broadcast
o
Int Mode – separate table setup to quickly start set time out values
•
Auto Clock Start – will start the clock as soon as time value is selected.
•
Auto Time Out Timer – will start intermission clock whenever Time Out Left is decremented.
