WARNING
Leakage of liquid under pressure!
When loosening the seal chamber lock screws, harmful or even hot sealing
fluids may spurt out or corresponding gases may escape.
▶
Wear suitable PPE (personal protective equipment)!
▶
Always open the upper lock screw first to allow any gas accumulation
to escape!
WARNING
Danger of crushing!
Please observe the weight specifications of the pump (see
or see
Section 1.2.2: “Pump drawing” [6]
).
▶
Pumps/units may be handled by a transport specialist only.
▶
Please observe the national legislation regarding the hoisting and bearing
capacities!
▶
Use suitable load suspension devices.
▶
Wear PPE, such as protective gloves and safety shoes.
CAUTION
Leakage of liquid und/or gas under pressure!
Be careful when filling and draining harmful and hot media into or out of the
sealing chamber.
Pumping, flushing and sealing media may be hazardous to health.
▶
Wear PPE.
▪
Protect the pump against fast and irregular cooling. Do not put down on
metal plates, avoid draft.
1.3.5 Storage of Installation Parts/Spare Parts
If the pump is to be temporarily stored prior to mounting into the line/machine,
keep it in the original packing.
The storage of the pump or separate parts must satisfy the following conditions:
15 to 25°C
▪
Ambient temperature
max. 60%
▪
Rel. air humidity:
Eccentric screw pump
Assembly Instructions, 09.22
09/2022 Released
TDD-00035234 1-051-8387
12
1 Mounting instructions
