manualshive.com logo in svg

Oerlikon Leybold Vacuum PHOENIX L300i, Operating Manual

Share
Download
Oerlikon Leybold Vacuum PHOENIX L300i Operating Manual Download Page 14

Description

14

 

GA10218_002_A7 - 9/2015 - © Oerlikon Leybold Vacuum

opens step by step. When valve V4b is open completely, pressure < 0,1 mbar, V4a 
will open also to get the maximum pumping speed. In PRECISION mode the 
PHOENIX L300i DRY opens the valve V4b only, with the disadvantage of low 
pumping speed but with the highest sensitivity.

When the leak detection process is stopped – STOP-button – all valves except 
valve V2a are closed.

Valve V3 is opened during venting of the inlet or test sample.

1.1.5     Partial Flow Method

In the partial flow mode the test sample is additionally evacuated by an auxiliary 
pump. Using the optional partial flow pump set offers to the user the following 
advantages (PHOENIX L300i

 

and PHOENIX L300i MODUL:

- faster response time
- entry into the measure mode already at an inlet pressure of 1000 mbar
- faster venting of large test objects

Alternatively to a partial flow pump set an external auxiliary pump may also be con-
nected via a tee, this option is possible for the PHOENIX L300i dry and PHOENIX 
L300i MODUL also. However, in such a case the PHOENIX L300i will not be able to 
make measurements already at an inlet pressure of 1000 mbar.

1.1.6     Sniffer Mode

The PHOENIX L300i may simply be converted into a sniffer leak detector via the 
rugged sniffer line (Cat. No. 252003)

For this the KF flange of the sniffer line is connected to the inlet flange (Fig. 1/1) and 
the sniffer mode is selected through menu mode. After pressing START, the inlet 
valve V1 (Fig. 2) opens. The sniffer lines have been designed in such a way that the 
PHOENIX L300i is operated in the FINE mode. If the fore vacuum pressure P2 
increases over 0,2 mbar respectively 0,1 mbar a warning sign and audio alarm 
comes up in the display

In the measurement mode the helium present in the ambient air is now indicated as 
the leak rate (about 2 · 10

-6

 mbar l/s). Smaller leaks may be detected by pressing 

the ZERO-button. In sniffer mode the smallest detectable leak rate is < 1· 10

-7

mbarl/s.

1.2    Supplied Equipment

The PHOENIX L300i will be shipped in a special cardboard packed separately in a 
plastic foil as protection against dust.

Supplied equipment includes:

Leak Detector PHOENIX L300i
Set of fuses 
Power cord
Folder with documents (Operating instructions, Spare part list)
2 L-type screwed connections (hose connections)
1 hose nozzle
Blank flange DN 25 KF
Clamping ring DN 25 KF
Centering ring DN 25 KF

Summary of Contents for PHOENIX L300i













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands