![background image](http://html1.mh-extra.com/html/oemtools/24494/24494_operating-instructions-and-parts-manual_3408692008.webp)
13. For safe and proper working, always keep the tools
clean.
Maintenance
1. When the battery is no longer operative, please refer to
an authorized after-sales service agent.
Troubleshooting
8
Operating Instructions and Parts Manual
24493/24494/24499
11/18
2018 OEMTOOLS
™
R2 RECHARGEABLE
SPEED RATCHET
1. Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused
by poorly maintained tools.
2. If the R2 Rechargeable Speed Ratchet break down
despite the great care taking during manufacture and
testing, you should have an authorized customer service
center for carry out any repairs.
3. You must indicate the reference number on the power
tool’s nameplate if you have any question or need order
replacement parts.
4. Please fully charge the lithium-ion battery powered power
tool before first use.
5. When using power tool with Lithium-ion batteries, usage
must halt and the batteries charged immediately when
LED indicator light shows continuous red (low voltage
protection). This is in order to prevent damage and
ensure product lifespan.
6. When Lithium-ion batteries are left unused for over 3
months, they must be charged before use and charged
periodically in order to maintain their lifespan. Do not
use an extension cord unless it is absolutely necessary.
The use of an improper extension cord could cause
the risk of fire, electric shock or electrocution.
7. Lithium-ion batteries must be charged periodically in
order to maintain their lifespan.
8. Maintain charger cord. When unplugging charger, pull
plug rather than cord to reduce the risk of damage to the
electrical plug and cord. Do not abuse the cord. Never
carry charger by its cord. Keep cord from heat, oil, sharp
edges or moving parts. Make sure cord will not be
stepped on, tripped over or subjected to damage or stress.
Do not use charger with damaged cord or plug. If cord is
damaged, it must be replaced by the manufacturer or
service agent. Damaged cords may create a fire.
Unauthorized replacement or repair may cause a hazard.
9. Maintain R2 Rechargeable Speed Ratchet and
accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condition
that may affect the R2 Rechargeable Speed Ratchet’s
operation. If damaged, have the R2 Rechargeable Speed
Ratchet repaired before use. Many accidents are caused
by poorly maintained R2 Rechargeable Speed Ratchet.
10. Clean the tool regularly with a dry cloth. Do not use oil,
gasoline, paint thinner, water, metal, water chemicals,
flammable materials or other corrosive liquid, all of
which may damage the tool.
11. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of
the tool in unexpected situations.
12. Before any work on the tools itself (e.g.maintenace,
tool change,etc.) as well as during transport and
storage remove the battery from the R2 Rechargeable
Speed Ratchet. There is danger of injury when
unintentionally actuating the On/Off switch.
2. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
3. Never service damaged BATTERY packs. Service of
BATTERY packs should only be performed by the
manufacturer or authorized service providers.
5. When the battery is no longer operative, please refer
to an authorized after-sales service agent.
6. If the R2 Rechargeable Speed Ratchet break down
despite the great care taking during manufacture
and testing, you should have an authorized customer
service center for carry out any repairs.
7. You must indicate the reference number on the
power tool’s nameplate if you have any question or
need order replacement parts.
4. If the charger light continues to flash red & green at
the same time on the charger, the battery pack may
be excessively hot (40°C/104°F or more) or cold
(0°C/32°F or less). Allow the battery pack to cool
down, warm up, and then reinsert. If the problem
persists, contact a service agent. Once the battery
pack is within the acceptable range, normal charging
will take place.