11
Operating Instructions and Parts Manual
24493/24494/24499
11/18
2018 OEMTOOLS
™
R2 RECHARGEABLE
SPEED RATCHET
REASSEMBLING THE DRIVE HEAD MECHANISM
CAUTION
:
Move the lock switch into the locked position and remove the battery pack from tool before
disassembling/reassembling any parts.
a
Use a pliers to compress the ends of the
retaining C-ring, and place the directional
disc over the C-ring so that the ends of
the C-ring align with the slot of the
directional disc.
Align the flat faces on the interior of the disc with
the flat faces on the perimeter of the push button.
Then release the C-ring so that
its expansion locks the directional disc in place.
It may be easier of you brace the drive
square on a firm surface while performing
this step.
Test the ratcheting motion in both
directions to make sure the tool is
functioning properly.
Step 4.
flat face
flat face
transmission gear once it is in place, making sure they
are exactly placed. The top face of the holder should be flush
with the inner periphery of the head.
Step 2.
Place Transmission gear inside the Holder and insert both
on transmission bar as shown.
Push the holder and checked the position by turning the
b
c
Insert the driver head assembly into the
ratchet head with the drive square on
the opposite side from the start button.
Make sure that the teeth of the ratchet
wheel have engaged with the teeth of
the pawl in the ratchet. This can be
checked by turning the driver head
once it is in place, and listening
for the clicking
sound of
normal
ratcheting.
Step 3.
Place the toothed ring over the top
of the drive assembly as shown.
Again, make sure that the teeth of
the ring have correctly engaged
with the inner mechanism teeth.
The ring should be flush against the
head assembly when the teeth are
properly aligned.
Step 4.
Place the remaining two
rings onto the assembly
as shown, making sure
that they are placed in the
correct order.
Step 5.
Step 1.
start button
push
turning
1
3
2
a
b
c
Make sure the transmission
bar is positioned in the hole
of motor correctly.
Short chamfer
Long chamfer
Transmission bar
Transmission bar
Hole
