background image

   

WARNING 

Read all safety warnings, instructions, illustrations and specifications provided with this power 

tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.Save all 
warnings and instructions for future reference. This operator’s manual contains important safety and operating 
instructions for power tool, lithium-ion battery pack and battery charger. The term “power tool” in the warnings refers  
to your mains-operated  (corded) power tool or BATTERY-operated (cordless) power tool.

Work area safety: 

1.   

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.   

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or 

      dust. Power tools create sparks which may ignite the dust or fumes. Avoid dangerous environments. Do not charge 
      battery pack in rain, snow, damp or wet location.
3.   

Keep children and bystanders and visitors away while operating a power tool. Distractions can cause you to lose 

      control. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
      capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning 
      use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not 
      play with the tool.
4.   

(For EU Market) This appliance can be used by children aged from 8 years and above and persons with reduced 

      physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision 
      or instruction concerning use of the appliance in a safe way and understand the hazards involved.
 Children shall 
      not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. If the 
      supply cord is damaged, it must be replaced by the manufacturer or its service agent or similar qualified person in order 
      to avoid a hazard.

Electrical safety: 

1.    

Power tool charger plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs 

      with earthed (grounded) power tools. Unmodified plugs and  matching outlets will reduce risk of electric shock.
2.   

Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. 

      There is an increased risk of electric shock if your body is earthed or grounded.
3.   

Do not expose power tool to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

4.   

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away 

      from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5.   

When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for 

      outdoor use reduces the risk of electric shock. 
6.   

If operating a power tool in a damp location is unavoidable, use a RESIDUAL CURRENT DEVICE (RCD) protected 

      supply. Use of an RCD reduces the risk of electric shock.
7.   

Charge in a well-ventilated area. Do not block charger vents. Keep them clear to allow proper ventilation. Do not allow 

      smoke or open flames near a charging battery cartridge. Vented gases may cause a risk of explosion.

   

SAFETY NOTES

General Safety Warnings
Save These Important Safety Instructions 

Please fully charge the lithium-ion battery powered power tool before first use.

Before using the battery and charger, read this operator’s manual and all labels on the battery 
pack, charger and power tool.

Use power tool lithium-ion batteries only in power tool. 

Use with other tools may result in a risk of damage, electric shock or personal injury.

   CAUTION! 

To reduce the risk of injury charge power tool lithium-ion batteries only in 

power tool lithium-ion charger. 

Other types of chargers may cause personal injury or damage. The Charger need to 

be used with the Adaptor which is provided by power tool. A charger that may be suitable for one type of battery may create 
a risk of fire when used with another battery. Do not wire a battery pack to a power supply plug or car cigarette lighter. Doing 
so will cause batteries to be permanently disabled or damaged.

2

Operating Instructions and Parts Manual 

24493/24494/24499

11/18

2018 OEMTOOLS

R2 RECHARGEABLE 

SPEED RATCHET

Summary of Contents for 24494

















Reviews: