12
Operating Instructions and Parts Manual
24493/24494/24499
11/18
2018 OEMTOOLS
™
R2 RECHARGEABLE
SPEED RATCHET
REMOVING THE MOTOR
CAUTION
:
Move the lock switch into the locked position and remove the battery pack from tool before
disassembling/reassembling any parts.
2mm
b
a
1.5mm
b
c
c
d
e
Move the lock switch into the locked position
and remove the battery pack from tool before
attempting to disassemble or reassemble the
tool.
Step 1.
When the motor is removed, the transmission bar
will be pulled out at the same
time. This will disengage the
transmission bar from the
drive mechanism.
Disassemble the drive
mechanism after removing
the motor (please refer to
operation on page 10).
Step 4.
Remove the “POWER” poly sticker annexed upon the retaining bolt.
Using a 2mm hex driver, remove the retaining bolt located
just behind the start button.
Remove the top plate and holding two-step pin.
Remove the start button, spring and solid
pin.
Remove the lock switch by sliding it out.
Step 2.
a
b
c
e
d
Unscrew the handle shell and remove it from
the tool body.
Use a 1.5mm hex driver to remove the retaining
bolt as shown.
Slide the motor out of its housing,
the transmission bar will be pulled
out together.
Step 3.
a
b
c
solid pin
two-step pin
top plate
start button
lock switch
lock switch
a
PO
WER
poly sticker
POWER
PO
WE
R
Transmission bar
Transmission bar
