SMART TERMINAL
INSTALLATION & COMMISSIONING
2 Mechanical
SmartTerminal
is supplied in an ABS cabinet and consists of;
The Main Card, with all controls and indicators mounted directly onto it
1 X Termination Board
2 X ABS door keys
2 X 003 Enable / Disable keys
2 X Jumper links
The front door of the ABS version is locked by way of two clips on the right hand side of the cabinet.
A special locating key which has two raised pins that are inserted into the side of the cabinet unlocks
the door.
DOOR RELEASE PINS
DOOR RELEASE PINS
Figure 1: ABS Door Key
2.1
Mounting the Enclosure
The panel MUST be mounted in an area that is NOT subject to conditions likely to affect its
performance, e.g. damp, salt-air, water ingress, extremes of temperature, abuse etc. is at an easily
accessible height and such that the indicators are at eye level.
Typical locations for the panel are the first and most obvious point of contact for emergency services
or a security office that is likely to be permanently staffed.
2.1.1 Enclosure Details
The LCDA can be surface or semi-flush mounted, is supplied with a detachable front door,
mountable back box and a minimum of two separate PCBs.
2.1.2 Fixing the Chassis to the Wall
Taking into account the weight of the panel securely mount it by using the three keyhole mounting
holes in the backpan, two in the top and one in the bottom. Use suitably sized screws and plugs for
the type of mounting surface.
Caution: Any dust or swarf created during the fixing process must be kept out of the cabinet and
great care should be taken not to damage any wiring or components.
