5
OTR 700 User's Guide Rev02 11/2016
P
ress the left or right button to highlight the (average) icon and use to cycle to the averaging
times of Real-Time, 15 seconds, 1, 4, 16 or 40 minutes.
Press to exit the menu mode and hide the menu bar.
Press to start a trace. Pressing the again will stop a trace.
T
o operate the cursors, use the
left and right buttons. Press the A/B button to toggle between A and B as the active cursor.
T
o view the Schematic View and event table, press , use the left and right buttons to highlight
the
(schematic view) icon and press
.
Touch Screen Tip
Alternately, the touch screen may be used to select the event table or the Schematic view by touching
the tabs immediately below the grid scale.
Note
The OTDR tab displays the trace with the parameters listed and loss and distance measurements dis-
played. The Event tab displays the trace with numbered events and an interactive event table, while the
Schematic tab displays the trace with numbered events and the interactive schematic view of the data.
T
o save a trace, press the button and use the left or right buttons to highlight the (file
storage) icon and press . Press , press and with save highlight press . Use the
touchscreen keyboard to enter the file name and touch save.
Touch Screen Tip
The onboard QWERTY keyboard is only operational with the touch screen capability.
Note
The Quick Save icon may also be use to save the trace. Touching the Quick Save icon will store the
trace to the active project folder and use the last base file name entered.
Chapter 3 Quick Start Guide
