Octave Copy Master II, User Manual

Page: 69 / 80

Octave Systems Inc. 69
Chapter 3: Trouble Shooting
No display on LCD or the unit does not operate when the
power is on.
■
Check the connections for the power cable and ensure that the power
outlet is working correctly.
■
Make sure that the rear-panel power voltage setting matches the voltage
of your power outlet.
■
If the duplicator was stored in a location where the temperature dropped
below 32°F (0°C) within the past 24 hours, leave the duplicator in a
warm room with a temperature of at least 65°F (19°C) for four hours
prior to powering the duplicator on.
Reader cannot read disc and shows error message.
■
Check the format of the master CD/DVD
■
Check the master CD/DVD itself for damage.
■
Your master disc may be copy protected. Normally, most of the DVDs
and some of the CDs you purchase from stores have been copy protect-
ed.
■
Use the Writer to read your master disc by selecting the writer as the
Master Reading Source (See “Select Source” on page 35). If it works,
make a copy of your master disc and treat the copy as the new master.
Then set the Master Reading Source back to the READER and try
again.
Buttons do not function.
■
The Copy Master II may still be busy performing a task. Give it some
time and press the button again. To interrupt the currently running pro-
cess, press the
ESC button and hold it for several seconds. If it still
doesn't work, turn the machine off, and then restart the machine after a
minute.
Copy completed, but the copies are not readable /execut-
able
■
Use the “compare” feature to check the copied disc (data discs only).
■
Based on our experience, the quality of your media plays a big role on
this part. Try to use high quality media to prevent such problems.
■
Use another DVD/CD player/ROM to test the copied media. Some-
times, your DVD/CD Player/ROM may not be compatible with record-
able DVD/CD disc.