52
FEA
TURES
OCTANE PRODUCT FEATURES
Octane Fitness products incorporate additional features to ensure that you experience great workouts. Learn more
and take advantage of many great features.
Heart Rate Monitoring and HeartLogic Intelligence
Octane products are equipped with state-of-the-art heart rate monitoring and control technologies that help you
make the most of your training efforts. All models include on-demand heart rate monitoring—just grasp the digital
contact heart rate grip sensors on the handlebars and your current heart rate is displayed on the console.
WARNING!
Use the values calculated or measure by the machine’s computer for reference purposes only. The
heart rate displayed is an approximation and should be used for reference only. Over-exercising may result in
serious injury or death. If you feel faint, stop exercising immediately.
For even greater control of your workout, Octane Fitness products are also equipped with HeartLogic Intelligence, a
sophisticated yet easy to use heart rate control technology. This sophisticated solution provides the most accurate
and effective workout using heart rate data captured by a wireless chest strap or the digital contact heart rate
grip sensors on the handlebars.
Using the digital
contact heart
rate sensors
(not available on
MTX)
Digital contact heart rate sensors are located on the handlebars. The grips can be
used to check your heart rate during your workout. For the most accurate heart rate
reading, grasp each contact heart rate grip so that the contact sensor portion of the
grip rests in the palm of your hand. Grip the contact sensors firmly, and keep your
hands steady and in place.
Using a wireless
chest strap
You may use any Polar™-compatible (5 KHz, coded or non-coded) transmitter to
transmit your heart rate to the electronics console at a distance of up to three feet.
Adjust the length of the elastic strap and fasten the transmitter around your torso,
underneath your shirt. Place the strap just below your chest. It may help to moisten
the electrodes on the back of the transmitter with a small amount of water for better
contact with the skin. The electrodes are the ribbed portion on the back side of the
transmitter that sits against your skin. Make sure the strap fits snugly but doesn’t
restrict breathing. The contact handgrips reading takes priority if both the wireless
and contact heart rate grips are in use.
Using an ANT+
heart rate
monitor
To connect your ANT+ monitor to your product, stand close to the Octane console
while wearing your monitor until the ANT+ icon in the upper right corner of the
console illuminates. This indicates that your device is connected and you may then
proceed with your workout.
Heart rate
programs
Octane products (excluding the Zero Runner, MTX and MT8000) offer several heart
rate controlled programs, giving you more variety to suit your personal needs. The
30:30 program, available on all Octane products, also uses heart rate data to provide
an assessment of heart rate recovery. We recommend that you try different programs
to determine your favorite. Refer to the Program descriptions for more information.
Summary of Contents for ZERO RUNNER ZR7000
Page 1: ...PRODUCT PROGRAMS AND FEATURES...
Page 61: ......
