Ochsner AIR 80 C13A, Operating And Installation Instructions

Page: 4 / 68

BA_AIR_80_C13A_AIR_80_C22A_OTE3_SW5x_EN_V07.docx Page 4 of 68
1 Notes on the documentation
Please read your heat pump's operating instruc-
tions carefully from front to back. The infor-
mation in this document will help you to operate
the heat pump correctly. This manual is to be
stored in the vicinity of the heat pump and must
be easily accessible. The precautionary pointers
below will be used in this document.
WARNING
Pointers which, if not heeded, can
mean danger to life and limb, and can
also lead to material damage. These
pointers must be heeded without fail.
ATTENTION
Pointer which, if not heeded, can lead
to an appliance malfunction and to
material damage (to system compo-
nents, building, ...). These pointers
must be heeded without fail.
NOTE
Tips which are intended to aid the job
in hand, or mean additional infor-
mation for the user.
ATTENTION
Pointers for work on electrical equip-
ment. These pointers must be heeded
without fail.
Attention - danger to life and limb!
2 Safety instructions
Read this manual carefully before you begin to
commission/adjust the heat pump!
Converting or altering the appliance is
not allowed. Work on the appliance
(repairs, alterations) may only be car-
ried out by the manufacturer or by a
specialist authorised by the manufac-
turer.
All circuit breakers in the heating sys-
tem are to be turned off before any
work is carried out on the terminal
strips or electrical connections (wir-
ing).
The control, auxiliary modules, termi-
nal
strips and wiring of the
control can also be supplied with line
voltage by external switching (safety
thermostats, etc.), even if the control
is not connected or is receiving no
power.
The commissioning as well as the ser-
vicing of the appliances may only be
carried out by personnel which are
authorised by OCHSNER.
The installation of the appliances and
their
electrical wiring may only be
carried out by a specialist according to
local regulations and codes of practice.
Protective functions for the heat pump
can be activated by the control. How-
ever, as the control is not certified as a
safety
appliance, the protection
against failure or damage to the heat
pump must be adapted to the local in-
structions (for instance, by additional
external switching of the safety appli-
ances used).
WARNING
The appliance may not be used as a
step or platform. Do not climb on the
appliance or place any loads on it.