93
OPERATIONAL PERFORMANCE (continued)
Activation:
Manual - push button (recommended)
Automatic - by immersion in water (as a backup if set ON)
H2O graphic indicates Wet Contacts are bridged (unit must be dried prior to transport or storage)
Cannot be manually activated deeper than 4 feet (1.2 m), if the Water Activation feature is set OFF.
Cannot be activated at elevations higher than 14,000 feet (4,267 m)
Shutoff:
Automatically shuts off if no dive is made within 120 minutes after initial activation. Reactivation required.
Automatically shuts off 24 hours after last dive (will reactivate if the H2O graphic is displayed).
Cannot be shut off manually.
Setting FO2:
Automatically set for 'Air' upon activation
Remains set for Air unless an FO2 numerical value is set
Nitrox set points from 21 to 50 %
If set for 21%, remains set for 21% until changed
If set for >21%, it reverts to 50% 10 minutes after the dive, if the FO2 Default is ON. If the FO2 Default is OFF, the
value will remain at the value set.
Operating Temperature:
The Veo 200/250 will operate in almost any
temperature
diving
environment
in the world, between 32 °F and 140
°F (0 and 60 °C). At extremely low temperatures, the LCD may become sluggish, but this will not affect it's
accuracy. If stored or transported in extremely low temperature areas (below freezing), you should warm the
module and its battery with body heat before diving.
ACCESSORIES
(optional items available from your Authorized Oceanic Dealer):
Lens Guard (computer module) - covers lens face, prevents scratches
PC download package (hardware and software)
Battery Kit - includes 1 battery, 1 battery hatch o-ring, silicone grease
SPECIFICATIONS (CONTINUED)
