80
CARE AND CLEANING
Protect your Veo 200/250 from shock, excessive temperatures,
chemical attack, and tampering. Protect the lens against
scratches with a transparent Instrument Lens Protector. Small
scratches will naturally disappear underwater.
Soak and rinse the Veo 200/250 in fresh water at the end
of each day of diving, and check to ensure that the areas
around the low pressure (depth) sensor (Fig. 89a), download
Interface Data Port (Fig. 89b), and buttons are free of debris
or obstructions.
To dissolve salt crystals, use lukewarm water or a 50%
white vinegar/50% fresh water bath. After removal from the
bath, place the unit under gently running water and towel
dry before storing.
Transport your unit cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Veo 200/250 should be inspected annually by an
Authorized Oceanic Dealer who will perform a factory pre-
scribed function check and inspection for damage or wear. To
keep the 2 year limited warranty in effect, this inspection must be
completed one year after purchase (+/- 30 days). Oceanic
recommends that you continue to have this inspection performed
every year to ensure it is working properly. The costs of annual
inspections are not covered under the terms of the 2 year limited
warranty.
Fig. 89 - Depth Sensor
b
a
