23
Backup Activation (
only if Water Activation is set ON)
As a backup, the Veo 200/250 will also automatically activate
by water contact. This is accomplished by bridging the gap
between contacts located on the Button stems and back of the
case. The graphic H2O that will be displayed as an indication
is described later.
If no dive is made within 2 hours after initial activation, the unit
will automatically deactivate. If the wet contacts are still
bridged, the unit will reactivate and display the H2O graphic.
SURFACE MODE
Surface Mode (Fig. 16A), identified by the Surface Time icon,
follows Diagnostic Mode after Activation. Information includes
Dive Number '0' (no dive made yet), Temperature (and icon),
Time of Day (with icon), the Battery Consumption Indicator, and
Surface Time (with flashing colon).
If the wet contacts are bridged, the graphic 'H2O' will appear in
place of the dive number '0' (Fig. 16B). After the unit is rinsed
and dried, '0' will replace 'H2O'.
Press the Left/Front (Advance) button to access a sequence
that includes Plan, Fly, DeSaturate, and Log Modes.
Press the Right/Side (Select) button momentarily (less than 2
seconds) to activate the Backlight.
Fig. 16A- Surface Mode
(module is dry)
Fig. 16B - Surface Mode
(module is wet)
