17
Low Battery Condition
Voltage level is checked upon activation and every 10 minutes
during operation.
When 75 % of the Rated Power has been consumed, the
lower bar of the Battery Indicator (only segment) will be
displayed, and the outline of the Indicator will flash once per
second as a warning that the Battery is to be replaced prior
to conducting any further dives.
Upon decreasing to a voltage level that will no longer
sustain proper operation, the Indicator will flash 5 times
followed by shutdown of the unit.
If a Low Battery Condition exists when the unit is activated
(by pressing the button), the graphic bAT and the Battery
Indicator will appear flashing for 5 seconds (Fig. 9) followed
by shutdown of the unit.
If the button is not pressed to activate the unit prior to a dive,
and a Low Battery Condition exists, the Battery Indicator will
appear flashing as a warning upon descent past 4 feet (1.2
meters). No other information will be displayed.
If the unit did not display a Low Battery Condition 'prior to'
entering the Dive Mode, and a Low Battery Condition occurs
during the dive, there will be sufficient battery power to
maintain unit operation for the remainder of 'that dive'. The
Battery Indicator will appear after the dive in Surface Mode.
Fig. 9 -Low Battery Condition
