35
TO SET - DIVE TIME REMAINING ALARM
(while in the Surface Mode)
Factory set for 0:00 (minutes), the Dive Time Remaining Alarm
can be set to values between 0:00 and 0:20 (minutes) in incre-
ments of 1 minute.
Press Both buttons simultaneously, release when SET: 2
appears.
Press and release the Left/Front (Advance) button, the Units
screen appears with the set point flashing.
Press the Left/Front (Advance) button 9 more times.
The graphic dtr, and Alarm (speaker) and Dive Mode icons
appear with the Dive Time Remaining value flashing
(Fig. 33).
Press and release the Right/Side (Select) button to advance
the Alarm value in increments of one minute, or press and
hold the button to scroll through the Set Points.
Press the Left/Front (Advance) button to accept the setting
and advance to Set Max PO2 Alarm, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 33 - Set Dive Time
Remaining Alarm
