2.6
Check SoundTrap Status
Note the ‘Status’ panel on the right (Figure
4). Carefully review the state of memory and
batteries in the right-hand pane, checking that all batteries show 100% charge and all
memory show 0% used.
Figure 2
–
Deploy Control
2.7
Configure the deployment
•
Select the ‘Deploy’ tab as shown in figure
4.
•
Configure the deployment parameters as follows:
o
The ‘
Recording Starts
’ section determines when recording will begin. Recording can
begin immediately on disconnection of the USB cable, at a pre-determined date and
time, or manually using the IR remote control. Note that the remote can always be
used to override the other options.
