2.8
Begin recording using the IR Remote Control
You may use the remote control to start recording. The
recorder housing must be open to receive the signal from the
remote.
•
Press ‘START’ to start recording.
•
Press ‘STOP’ to stop recording.
•
If you have set a recording to start recording at a
later time, the recorder will blink red to indicate it
is ‘armed’ and waiting.
•
The ‘armed’ state is cancelled by pressing Stop key.
•
Re-enable the armed state by pressing the ARM
button.
•
You can verify recording has started by checking for slow blinking of the status (green)
indicator.
