MNL-1007 REV A
26
Applying Wavelength Correction
In rare cases in which there appears to be a wavelength or wavenumber error, perform
the wavelength/wavenumber correction. The software features two techniques for this
correction.
Applying self-correction:
1.
Click on the
Wavelength & Wavenumber Correction
button to
open the wizard.
2.
Select the
Self-Correction
radio button and click on the
Proceed>>
button.
3.
A window will pop up asking you to connect the light source to
the module. Connect a broadband NIR light source and click
OK
.
4.
Wait until the auto-correction is done. A window will pop up at
the end of the operation.
5.
Click
OK
, then
Close
the wizard.