Oce VarioLink 4522c, User Manual

Page: 67 / 332

Mac OS X 10.2/10.3/10.4/10.5
5
5-6 VL6522c/VL5522c/VL4522c
5.1
Configuring the LPR settings
TCP/IP setting for the machine
Specify the IP address for the machine.
LPD setting for the printer
Before using LPR printing, enable LPD printing in "LPD Setting" for the machine.
d
Reference
For details on specifying the IP address for the machine, refer to the "User's Guide [Network Administrator]".
For details on the LPD settings for the machine, refer to the "User's Guide [Network Administrator]".
Configuring the TCP/IP settings for the computer
Configure the TCP/IP settings for the Macintosh computer connected to the printer.
1
In the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
The Ethernet setting window appears.
% For OS X 10.5, select "Ethernet", and then click [Advanced].
% For OS X 10.4, select "Built-in Ethernet", and then click [Configure].
4
Click the "TCP/IP" tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the
network to which the Macintosh computer is connected.
6
Click the close button at the top left corner of the window.
% When the "This service has unsaved changes" message appears, click [Apply].
Adding a printer
1
In the "Apple" menu, select "System Preferences".
2
Click the [Print & Fax] icon.
3
Click [+] on the "Print & Fax" window.
4
Click [IP] or [IP Printer].
5
In "Protocol", select "LPD".
6
In "Address", enter the IP address for the machine.
The printer driver corresponding to this machine being identified with its IP address is automatically
selected.
% After the printer driver is selected, go to Step 8.
% If an incorrect printer driver is selected, go to Step 7.
7
Select the desired printer driver manually.
% When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select "GENERIC" from the "Print Using", and then select the printer driver
of the desired model name from the list.