Oce Repro Desk User Manual Download Page 42

Page: 42 / 464

Océ Repro Desk Server User Manual

Make the necessary changes (see following pages).

Click OK to save the changes and close the window.

General

In the General tab you can check and change:

Viewer has black background

Check this box so that you will always have a

black background when you open the viewer.

Use Large Font for Windows Report Printing

Check this box so that when you

print out an electronic work order, large fonts will be used for easier reading.

Allow Folding Column in Job

Allows you to select a folding method from the

Jobs window

Banded Memory Size

This is the amount of banded memory that will be used

when printing a file to a Windows printer or to file (Archive). If you increase
the amount of memory, performance will improve.

Global Units The default units of measurement.

Accounting

You can select:

■

ODBC Set: Uses Set accounting table

■

ODBC Sheet: Uses Accounting information table.

See ‘Accounting’ on page 361 for more information.

Note:

You need to start a new job, or restart Repro Desk for certain options to

take effect.

Summary of Contents for Repro Desk

















































































































































































































































































































































































































































































Search results

Summary of Contents for Repro Desk

Reviews:

Related manuals for Repro Desk

Brands by name

Popular brands

Oce Repro Desk, User Manual

Search results

Summary of Contents for Repro Desk

Reviews:

Related manuals for Repro Desk

Brands by name

Popular brands