Oce Repro Desk, User Manual, Page: 249 / 464

Print on Océ TDS400 249
Rolls and Sets tab
The Rolls and Sets tab contains settings for media type and fit, set count and
collation.
▼
Rolls and Sets options
1
Select ‘Print Océ TDS400’ in the ‘Print’ quick menu.
2
Click the Rolls and sets’ tab at the top of the window.
3
The following window will appear:
[137] Finishing Properties Window: Rolls and sets tab
Roll Selection
If you select ‘Auto Roll’, the Océ TDS400 will select the roll
that ensures a best fit for the printed drawing. Otherwise, choose a specific roll
or choose ‘Manual’ Feed if you wish to insert the media manually.
Media Feed
Available only if you choose ‘Auto Roll’. Choose whether you
want Repro Desk to seek only an exact fit, or whether smaller, larger or any
size is acceptable.
Number of Sets
Enter the number of job sets to print.
Collation Options
Select the ‘Reverse Collation’ check box to have the first file
of the set printed last, so that it will be on top after printing.