Oce PlotWave 750, User Manual

Page: 22 / 148

3-2 Machine Information
Machine Information
Océ 750 Overview
The Océ 750 Printer provides high quality printing suitable for any IBM compatible PC
environment. The printer's main body engine works in conjunction with the New Open
Architecture (NOA) of the print controller to provide a flexible and modular way of
customizing the language interpreter, the I/O and communication, and the system
control. NOA supports a modular-based, object-oriented system software that enables
you to use the special software modules developed to enhance printing capabilities and/
or adjust the IP system to meet your special requirements.
The built-in electronic recirculating document handler (ERDH) provides dual access
capability, enabling the printer to receive a job while another job is printing or rasterizing.
This timesaving system allows you to work with optimal efficiency while the printer is
operating at peak capacity.
The advanced finishing system of the Océ 750 provides you with the option of sending
print jobs to the output tray face down and in correct order.
The Océ 750 printer is perfect for any work environment.
• use it as a non-network printer by connecting it to your PC with standard serial
or parallel port cabling.
• install the optional network interface card and use it as a standard network
printer supporting NetWare, AppleTalk (EtherTalk) or TCP/IP.
• install the Océ 750 as a high-end network printer in an AS 400/IBM Host
Environment.
Highlights of the Océ 750 include:
• 75 ppm
• 400/600 dpi
• duplex mode
• 3 standard paper trays plus a Multi-sheet bypass tray
• LCT, Finisher and Trimmer Unit and Punching Unit