Oce PlotWave 750, User Manual

Page: 10 / 148

2-2 Safety Information
Safety Information
User Instructions
The following pages include important safety information, which you must read and
understand before you attempt to operate the printer. If you have any concerns about
safety matters, please contact your service representative. Keep this manual
permanently located with the printer, so that this safety information is readily available.
Machine Safety Labels
Machine safety labels are attached to the internal area of the printer. The purpose of
safety labels is to alert you of imminent or potentially hazardous situations or conditions.
Be sure to heed all safety label information. If any safety label becomes illegible due to
soilage, etc., please contact your service representative for information about label
replacements. Sample safety labels are shown on the following page.
TO AVOID GETTING BURNED Do not touch any machine area that you are advised not
to touch by a warning or caution label.
DO NOT REMOVE WARNING OR CAUTION LABELS
Clean labels as needed to maintain legibility. If any warning or caution label is removed
or becomes illegible from soilage, please contact your service representative for
information about label replacements.
The following standard safety categories are commonly used on product labeling.
DANGER:
Danger indicates an imminent hazardous situation, which, if not avoided, will
result in death or serious injury.
Note: The DANGER category is not required for this product, and is included here for general user
information.
WARNING:
Warning indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION:
Caution indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate bodily injury.
NOTICE: Notice provides information on the correct handling or use of the machine to prevent
breakage of the printer or some machine part, etc. It does not indicate concern for personal safety.