Oce PlotWave 750, User Manual

Page: 132 / 148

8-32 Key Operator Mode
Key Operator Mode
1 Press [
HELP
] to display the Help Screen, then touch
Key Operator Mode
.
Enter a 4-digit Key Operator password, then touch
OK
to display the Key Operator
Mode Screen. (See note.)
2 To display menus [11] to [17] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch
[13] Memory switch setting
to display the Memory Switch Setting Screen.
Memory Switch Setting Screen
Memory Switch Setting [13]
This function allows you to change the Memory Settings listed below. See p. 8-33 for
details on Memory Settings.
SW No. Item Setting (default is underlined)
No. 09: Automatic tray switching OFF/ ON
No. 23: Job offset operating OFF/ ON
No. 24: Continuation print OFF/ ON
No. 26: Key click sound OFF/ ON
No. 27: 1 SHOT indication time 3 seconds/ 5 seconds
No. 28: Power save screen Shut off mode/ Low power mode
No. 33: Arrow key change (Image Shift) Decimal point off (1 STEP 1mm)/ Decimal point
on (1 STEP 0.1mm)
No. 37: Key click sound (No paper/JAM) OFF/ 3 seconds/ 5 seconds/ 10 seconds
No. 41: Trimmer (STD/Non STD size) STD size/ Non STD size
(no function)
Key Operator Mode Screen 1 Key Operator Mode Screen 2
NOTE: If an invalid password is entered, enter a valid 4-digit password.