Oce OP1016, Operation Manual

Page: 9 / 32

1-1
1 Preparations
Names of parts
Main body
1 Original cover — Open and close this cover when setting an original on the platen.
2 Platen — Set the original to be scanned face-down in the left-rear portion of the platen.
3 Original size indicator lines — Be sure to align the original with these lines when setting an
original on the platen.
4 Operation panel — Perform operations here.
5 Main switch — Turn this switch ON (|) when using the scanner.
6 Scanner interface connector — Use to connect the scanner to the computer network with a
10BASE-T or 100BASE-TX cable.
Important!
NEVER attempt to remove the Scanner Interface Card.
1
2
4 5
6
3