Performing the Required Operation at the Scanner
3-5
When performing the scanning operation at your computer
1
Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN
Source will appear. Make any settings that you want, and put a check mark in the
[Waiting Scan]
checkbox.
2
Click on the
[Connect]
button in the main dialogue box and, once the connection to the scanner is
made, click on the
[Scan]
button.
Note
Putting a check mark in the
[Waiting Scan]
checkbox will allow you to start the actual scanning
operation by pressing the
Start
key at the scanner.
3
Set the original that you want to scan in the scanner
and press the
Start
key. Scanning will begin.
Notes
•
Scan settings can also be made on the operation panel of the scanner. Change any settings
there that you want.
•
If you enter different settings in your computer and in the scanner, the settings made on the
operation panel of the scanner will take priority.
Summary of Contents for OP1016
