Oce CS656 Pro User Manual Download Page 99

Page: 99 / 349

CS665 Pro

3-71

Adjustment

3.9.4

04 Pasting Start Position Adjustment

Perform this adjustment for the position to start pasting on the body set.

To specify Pasting Start Position Adjustment

Touch [Adjustment] on the Machine Status Screen.

The Adjustment Menu Screen will be displayed.

Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [04 Pasting Start Position].

The Pasting Start Position Adjustment Screen will be displayed.

Touch [Ahead] or [Back] to select the direction to start pasting.

Display the required size key using up/down arrow keys to select the paper size of the body set to be
attached with the cover.

Touch [COPY] tab.

The Copy Screen will be displayed.

Select the PB tray or desired main body tray, then press [Start].

A sample pattern of perfect-bound book will be output.

Summary of Contents for CS656 Pro






























































































































































































































































































































































Search results

Summary of Contents for CS656 Pro

Reviews:

Related manuals for CS656 Pro

Brands by name

Popular brands

Oce CS656 Pro, User Manual

Search results

Summary of Contents for CS656 Pro

Reviews:

Related manuals for CS656 Pro

Brands by name

Popular brands