Oce CS656 Pro, User Manual

Page: 105 / 349

CS665 Pro 3-77
Adjustment 3
3.9.7 07 Temperature Adjustment
Perform this adjustment to control the condition of paste to be dried by setting the temperature on the
following sensors inside the melt tank.
Melt Tank -Low: Melt tank temperature sensor/ Lw (TH4)
Pasting Roller: Pasting roller temperature sensor (TH1)
2
Reminder
Do not make unnecessary change of the temperature setting inside the melt tank.
To specify Temperature Adjustment
1
Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2
Touch [04 Finisher Adjustment], [08 Perfect Binder Adjustment], and then [07 Temperature Adjustment].
The Temperature Adjustment Screen will be displayed.
3
Touch [COPY] tab.
The Copy Screen will be displayed.
4
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
5
Check that the paste applied on the body set is dried properly.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
7
Touch [Melt Tank -Low] or [Pasting Roller] to select the position to set the temperature.