Oce CS656 Pro, User Manual

Page: 50 / 349

3 Adjustment
3-22 CS665 Pro
6
Check misalignment (a), in which misalignment occurs if the paper width setting is larger than the actual
width, or paper curving (b), in which a sample set is curved if the paper width setting is smaller than the
actual width has occurred.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Paper Width (Staple) Screen will be restored.
8
Display the required size key using up/down arrow keys, and touch it.
9
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 0.1 mm
10
Remove the output paper, and close the Finisher door.
11
If the test desired result cannot be obtained, touch [ADJUSTMENT] tab. Repeat the adjustment steps
from 3 to 10 until the desired result is obtained.
12
Touch [Return] to restore the Adjustment Menu Screen.
a
b