Oce CS 5070, User Manual

Page: 85 / 139

Printer maintenance and storage 85
▼
▼ ▼
▼
To clean the encoder strip
1
Raise the printer cover.
2
Locate the encoder strip. The encoder strip is a thin piece of plastic that is
attached to a metal bar. This assembly is located just below the flex trailing
cable support, and runs the entire width of the printable area.
[32] Cleaning the encoder strip
3
With a cotton swab moistened in isopropyl alcohol, gently clean the top and
bottom of the encoder strip. Be sure to clean the entire length of the encoder
strip.
4
Close the cover.
Attention:
Use extreme care not to bend or damage the encoder strip in any
way. Any damage to the encoder strip can cause the printer not to operate
properly.
Note:
You can also use canned air to clean the encoder strip. This method will
only be effective to remove lint and other dry materials. If ink or any liquid gets
on the encoder strip, you must use the cotton swab method.