Oce CS 5070, User Manual

Page: 61 / 139

Printing options 61
▼
▼ ▼
▼
To set auto-cut
1
Press
Setup/Paper Option/Auto-Cu
t.
2
Choose
On
or
Off
.
3
Press
OK
.
Saving media
With the
Save media
option activated (by default), the media advances only far
enough to print the image. When not activated, the printer advances the full
print area of the loaded media. For example, if a 36 inch roll is loaded, the
printer advances the entire print area for a standard 36 x 48" sheet, even if the
printed image is only 30 inches long.
▼ ▼ ▼ ▼
To turn off Save Media
1
Press
Setup/Paper Option/Save Media
.
2
Choose
Off
.
3
Press
OK
.
Selecting auto-wipe
The printer automatically wipes the cartridge jet plates periodically during
printing (by default). However, you can de-activate this setting if you are
having problems with banding.
Note:
Not wiping the cartridge jet plates can cause inkjet clogging.
▼ ▼ ▼ ▼
To turn off the wiper
1
Press
Setup/Paper Option/Auto-Wipe
.
2
Choose
Off
.
3
Press
OK
.
Applying ink reduction
Ink reduction lets you reduce the percentage of ink laid down by the printer.
This option applies to vector-based images only, and has no effect on
continuous tone (raster) images. This is useful for images with large amounts
of printed area, and limits bleeding or over-saturation of the media. However,