Oce BLM 500, User Manual

Page: 25 / 106

25
The Job Mimic
The Job Mimic
Introduction
The job mimic shows the current machine status.
Illustration
[6]
[6] The Job Mimic
Component - function table
[9]
No. Icon Information
1
[7]
The following items are shown
■
the size of paper
■
the format of the paper in the
gathering area
■
the broken line shows the fold line
■
the small thick lines show the stitches
■
the arrow shows the original feed
edge in the printer
2
[8]
The set thickness, in mm, is shown.
3
[9]
The number of forms is shown. If the
pressure is adjusted, the setting is shown
in brackets. A red X shows that the form
function is not active.
4
[10]
The trim setting is displayed. A red X
shows that the trim function is not active.