![background image](http://html1.mh-extra.com/html/oce/760c/760c_configuration-manual_3217726023.webp)
1
1-11
Connecting network cable to the Océ 760C
Ethernet connection
For Ethernet connections, the Océ 760C supports Shielded Twisted Pair (STP)
cabling, defined as Category 5 for use with 100BaseT; or as Category 3, Category 4, or
Category 5 for use with 10BaseT. The cable uses an 8-pin RJ-45 connector that plugs
into the RJ-45 socket on the Océ 760C.
N
OTE
:
The 100BaseT type supported by the Océ 760C is 100BaseTX, also known as
Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
“100BaseT” is used to refer to 100BaseTX.
T
O
CONNECT
TO
THE
E
THERNET
BOARD
•
Connect the network cable to the RJ-45 connector on the back of the Océ 760C.
You must use a Category 5 unshielded twisted pair cable network cable for 100BaseT.
Token Ring connection
For Token Ring connections, the Océ 760C supports an RJ-45 connector and
Shielded Twisted Pair (STP) with a DB-9 connector.
If the Token Ring option is installed, you cannot enable both Ethernet and Token Ring
simultaneously. For more information, see
T
O
CONNECT
TO
THE
T
OKEN
R
ING
BOARD
•
Connect the network cable to the proper connector on the back of the Océ 760C.