27
36x PTZ IR Outdoor Camera User Manual
b.
Click the up/down direction buttons to select a focus mode:
AF
(Auto-focus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): To adjust the focus manually with the
FOCUS+
and
FOCUS-
buttons.
HAF
(Half-auto Focus): The camera automatically focuses once after panning, tilting and zooming.
c.
Click
IRIS+
button to save the settings.
•
Setting the focus limit
.
This function is used to limit the minimum focus distance. You can configure the focus limit to a
longer distance when the target is at a distance to prevent the camera from focusing on the objects close to it, or configure the
focus limit to a shorter distance when the target is near the camera to prevent it from focusing on objects father away. You can
set the
FOCUS LIMIT
to 1CM, 30CM, 1M, 3M or AUTO.
4.3.2 TASK 2. Configure the zoom settings
•
Setting the zoom limit
. Zoom limit is a user-configured limit of the zoom amount (Zoom amount=optical zoom× digital
zoom). If you set the zoom limit to the minimum value (22), the digital zoom is disabled and the optical zoom will be at the
maximum value; if you set the zoom limit to a smaller value, the digital zoom will be enabled.
a.
Move the cursor to
ZOOM LIMIT
using the direction buttons and click
IRIS+
to open the submenu.
b.
Click the up and/or down direction buttons to choose the limit Options are 22, 44, 88, 176, and 352.
c.
Click
IRIS+
button to confirm your settings.
•
Configure zoom speed
. You can define the speed at which the lens changes from full wide zoom to the optical zoom.
a.
Move the cursor to ZOOM SPEED using the direction buttons and click
IRIS+
+ to open the submenu.
b.
Click the up and/or down direction buttons to choose the speed:
HIGH
(default),
MEDIUM
or
LOW
.
c.
Click
IRIS+
button to confirm your settings.
4.3.3 TASK 3: Configure the Day/Night mode
There are two parameters available for day/night mode configuration: IR Cut Filter and D/N level.
a.
IR cut filter
. The IR cut filter can be set to
AUTO
,
DAY
or
NIGHT
.
SECTION 4: USING THE OSD MENUS
