26
SECTION 4: USING THE OSD MENUS
4.
IR correction settings
. This parameter is used to correct focus problems caused by IR light. You can set the IR CORRECTION
to
ON
or
OFF
.
4.3 Configuring Image Parameters
You can set the camera parameters including focus, shutter speed, iris, etc. Configuring image parameters for the camera includes
several tasks (see below). To open the camera parameters settings menu, go to
MAIN MENUS
g
DOME SETUP
g
CAMERA
SETUP
.
Camera settings
4.3.1 TASK 1. Configure the focus settings
•
Setting the focus mode
a.
Move the cursor to FOCUS using the direction buttons and click
IRIS+
to change the cursor to hollow.
