TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-39
¾
UPnP:
Choose to enable or disable the UPnP function. Only when the function is enabled,
can the UPnP take effect.
¾
WAN interface:
Select to run UPnP function on which interface.
)
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.4.3 SNMP
Choose “
Service
→
SNMP
”, you can see the SNMP screen (shown in Figure 4-40).
Simple Network Management Protocol (SNMP) is a troubleshooting and management protocol
which uses the UDP protocol on port 161 to communicate between the clients and servers. The
router can be managed locally or remotely by SNMP protocol.
61
