TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
¾
Add:
Click this button to add a VC. First fill the parameters above and then click this button,
thus your new VC will be added to the
Current ATM VC Table
.
¾
Modify:
Click this button to modify your existed VC. First choose the desired VC and modify
the parameters, and then click this button, thus your existed VC will be modified.
¾
Delete:
Click this button to delete your existed VC. First choose the desired VC, and then
click this button, thus your existed VC will be deleted.
¾
Undo:
Click this button to abandon your operation.
¾
Refresh:
Click this button to refresh the ATM VC table.
)
Note:
After configuration, you need to click the
Save
button appeared on the left panel so that your
configuration can still take effect after the Router reboots.
4.2.1.2 ATM
Choose “
Setup
→
WAN
→
ATM
” menu, you can configure the parameters for the ATM of your
ADSL Router in the next screen (shown in Figure 4-4). Here you may change the setting for QoS,
PCR, CDVT, SCR and MBS.
Figure 4-5
¾
VPI/VCI:
Choose a desired ATM VC, and the VPI/VCI value will be displayed. The values can
not be changed.
21
